A sunray-oxidized plastic headlight lens is frequent on older automobiles and people left exterior constantly. The diploma of oxidation can fluctuate from a slight movie to a heavy uneven one. Mine was crusty and thick, and was turning yellow in locations. I couldn’t see the headlight bulb behind the in any other case clear lens. Consequently, its nighttime lighting was compromised, making it a security hazard Eyeglass Lens Wipes B08BZR42KL.
Changing this lens is dear, round $200. It was less expensive and simpler to repair it myself with a $10 restoring package and a rotary instrument. Right here is how.
Retailer-bought restoration package used ($10 or much less)
Four-oz.of thick burnishing fluid
Four-oz.of spray lubricant (handled water)
three burnishing pads (2″x2″-square) of differing high-quality grits
1 sealed-in liquid wax wipe
1 skinny plastic glove
Further objects used
a roll of one-inch-wide masking tape
sturdy rubber gloves
wiping material or towel
security glasses or goggles (splattering happens)
circulating fan, if performed indoors
1 handheld rotary system (Dremel-type), 5000-rpm or much less
1 rotary sharpening attachment with 2 rotary felt buffering pads connected to its stem (the pads are 1/Four”-thick wheels, 1″ in diameter, every)
Warning! This high-speed burnishing step should be performed with a really mild/gentle contact, else it can soften or burn-scar the lens’ plastic floor. Preserve the outer rolling floor of the felt pads flat towards the lens after they contact it. Or, if you happen to suppose it can’t be performed this manner, use a hand-drill buffing attachment (1500-rpm) as a substitute, or do it by hand.
Clear the headlight floor.
Masks tape any painted metallic edges round it.
Placed on the rubber gloves.
With a small rag, apply a the thick burnishing fluid over the cloudy a part of the lens.
With the rotary instrument set at its slowest pace (#1), frivolously burnish the clouded a part of the lens with regular adjoining back-and-forth strokes. Transfer the roller-side of the felt pads steadily each horizontally and vertically throughout the lens floor, frivolously. Tip: Take your time. This methodology is way quicker than doing it by hand.